UEFA Champions League

List of the catalog of this article:

• 1, What does the door in the three-door version and the five-door version of the car mean?
• 2、What are the cars with frame without doors
• 3, How long does it take to change the door
• 4. door disassembly steps

What does the door in the three-door version and the five-door version of the car mean?

The door specifically refers to the door that leads directly to the cockpit after opening, including the front and rear doors and the rear hatchback doors. The trunk lid of the back of the sedan does not belong to the door. The three-door version, such as Volkswagen Shangku sports car, two-box, three-door, two front doors and one rear hatchback door. Five doors. For example, the MG6 sedan hatchback version has four doors and a rear hatchback trunk lid.

As the name implies, it is divided according to the door. A five-door car has five doors, and a three-door sedan has three doors. The concept of the door here is that after the door is opened, the space in the car can be used, as well as people or things can be placed.

First, learn about the "concept of the door", the door: the entrance and exit of the building, and also refers to the device installed that can be switched on and off the entrance and exit. Put it on the car, and the door willIt is the entrance and exit of the car, and because the car has a fuel tank cover, a cabin cover, a tail box cover, etc., it can be regarded as a door.

Hello, the car butler team will solve the so-called 3-door version for you, which is the driver's door, the co-driver's door and the trunk door. This is the three-door. Generally, short-wheelbase versions of cars adopt a three-door design. The 5-door version is to add one door each to the left and one right in the back row on the basis of the original three doors. This kind of car is generally long and comfortable to ride.

What are the cars with frameless doors

Cars with frameless doors include Volkswagen Beetle, Zero Run S0 Volkswagen cc, etc. With the continuous development of the automobile industry and the continuous improvement of people's living standards, people's requirements for buying cars are also getting higher and higher. Not only look at the brand, look at the three major parts, look at the configuration, look at the cost-effectiveness, but gradually, they also begin to pay attention to some details.

smart fortwo, zero-run S01 (electric vehicle), Volkswagen Beetle, etc. are all more than 100,000 frameless doors. Nowadays, frameless doors generally appear in sports cars or sports cars, especially convertible sports cars. Because there is no frame, it can make the driver's vision wider and narrow the A-pillar blind area.

The models of frameless doors include: Subaru XV, Tiger, Leopard, Forester, Lion, etc.

How long does it take to change the door of the car?

1. Generally speaking, it takes two to three days to pick up the car in the S store to change the door, because the steps of changing the door are relatively complicated. The S store has direct contact with the car manufacturer, and you can get the original accessories. But in some auto parts cities or auto repair shops, the quality and source of these doors cannot be guaranteed.

2. Generally speaking, it takes two to three days to pick up the car, because the steps of replacing the door are relatively cumbersome.

3. As long as there are enough spare parts, it only takes 1-2 days to change the door of the 4S store, which depends on the technical ability and service quality of the 4S store. However, 4S stores may also encounter new car doors out of stock, resulting in a slightly longer time, which is not inevitable, because quality is also a very important part of car maintenance or repair.

4. It usually takes a few days to change the door, and it usually takes 5 hours to change the door. Before changing the door, confirm whether the replacement accessories are correct. After the accessories are complete, professionals can install them quickly. The door can reduce side collision to a certain extent, protect the people in the car, and provide a passage for the people in the car to enter and exit.

door disassembly steps

1. Car door panel disassembly steps: you need to prepare the disassembly tool first. First, remove the two plastic pins, so you need to press the middle point inward with a tool first, and then pry it out with scissors. Pay attention to press the middle point. Just loosen the remaining two screws with the prepared tools and remove them.

2. Prepare tools and work carts or workbench frames.Open the door to the maximum to make it easier to operate the hinged support. Place a bracket on the lower edge of the door to support the weight of the door and protect the door, and rotate the window glass. Disassemble the door and the body wire connector to separate the door harness.

3. Disassembly and installation steps of car door panels: 1. The disassembler must be equipped first. First, remove the two plastic pins. First, press the midpoint in with a special tool, and then change the scissors to pry it out. Pay attention to the middle point. Use the prepared special tool to loosen the remaining two screws and take them out.

4. First of all, insert the small cone into the gap between the door handle and the door, and gently pry it to remove the door handle. After that, use the cross-change cone to remove the screws inside the doorknob. After unscrewing, you can remove the whole doorknob.

5. How to disassemble the car door 1 Method/Steps Turn off the ignition switch and all electrical appliances, and remove the ignition key in the 0 (pre-locking position) position. Use the disassembly wedge to remove the cover from the bottom up. Use a torque wrench and spline sleeve to screw out the fixing bolt. Rotate the two clips at the bottom of the door panel by 90°.

6. Disassembly and installation steps (1) Prepare tools and work carts or workbench frames. ( 2) Open the door to the maximum to make it easier to operate the hinged support. Place a bracket on the lower edge of the door to support the weight of the door and protect the door, and rotate the window glass (Figure below).